Graco Snugride Click Connect 35 Infant Carseat

Description

Graco Snugride Click Connect 35 Infant Carseat. Condition is New. Shipped with USPS First Class (3 to 5 business days).o Fedex home delivery.
Ultra-lightweight infant car seat is easy to transport from the car to the stroller and everywhere in between
Rear-facing car seat helps protect infants from 4 - 35 pounds; and up to 32", making it an excellent first car seat for baby
Click Connect system provides a one-step secure attachment between the rear facing car seat to all Graco Click Connect Strollers to create a travel system
These Graco infant car seats are rigorously crash tested to meet or exceed US safety standards and reassure safety-conscious parents
SafeSeat Engineered and crash tested to meet or exceed US standard FMVSS 213. Car seat width inside 11.75 inch. Indications :
Dimensions: Length: 28", Width: 18.66", Height: 15.59" Weight differs depending upon model: SnugRide Click Connect 35: Weight without base: 7.5 lbs Weight with base: 14.17 lbs SnugRide Click Connect 35 LX: Weight without base: 9.6 lbs Weight with base: 15.82 lbs Rear-Facing Only. Weight: 4-35lb Height: up to 32" Head must be more than 1" from the top of the headrest "
Directions :
Machine-washable seat cushion and canopy Metal and plastic parts may be cleaned with mild soap and cool water Buckle may be cleaned with a damp cloth Harness straps may be spot cleaned Refer to your manual (see link below) for full cleaning instructions To Unbuckle Harness: 1. Lift the lever and pull the shoulder harness straps to loosen the harness 2. Tilt the top of the buckle toward the child’s abdomen 3. Press in at the top of the red button 4. Pull tongues out of the buckle Harness Buckle Cleaning Process: Turn the restraint over and push the retainer through the harness strap slot to remove the buckle from the car seat. Place the buckle in a cup of warm water upside down and gently agitate the buckle, pressing the red button several times while it is in the water. Do not submerge the harness webbing and do not use soaps or lubricants, only rinse the harness buckle with warm water. Shake out the excess water and allow the harness buckle to air dry. Reattach the harness buckle into the same slot and re-check harness for correct installation according to the car seat manual before use.