CDMA 850/1900MHZ Cell Phone Signal Booster Amplifier Repeater Antenna Home call

Description

this link have two size ,one is for phone card CDMA 850MHz,Another is for CDMAPCS 850MHZ and 1900MHz
You can choose which one will be fit you ,thanks
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
first show it dual frequency CDMAPCS 850MHz/1900MHz
CDMA 850/1900MHz Cell Phone Signal Booster 2G 3G 4G Dual Band Amplifier Repeater
CDMA PCS 850/1900MHz Dual Band Cell Phone Signal Booster 2G 3G Antenna Kits 4G
Main Engine：
Model: LC17L-GD
Working frequency:
Up 8890～915/1710～1785MHz,
Down 925～960/1805～1880MHz.
Gain：
Up 58±2dB ;
Downs: 65±2dB
Output power:
up 13±2dBm ;  Downstream 17±2dBm
Working voltage: AC: 100～240V, 50/60Hz
DC:5V 2A
Ambient temperature:-10℃～55℃
Weight: ≤0.5kg
Size: 190x110x20mm
[Indoor antenna]
Frequency range: 824-960MHZ
Antenna type: omnidirectional antenna
Gain: 5BDI
Input impedance: 50 ohms
Antenna characteristics: The rod antenna is an omnidirectional transmitting antenna with a range of 360°, which can greatly improve the coverage.
Feeder type: four shielded coaxial cable
Frequency range: 0-2.5GHZ
Connector: pure copper SMA connector
Specifications: Standard 12m
[dedicated feeder]
Feeder type: four shielded coaxial cable
Connector: pure copper SMA connector
Frequency range: 0-2.5GHZ
Specifications: Standard 12m
[Outdoor Receiver]
Frequency range: 820-960MHZ
Acceptable angle: 172°
length: 100mm
Installation precautions: Try to keep a certain distance from the metal. It is recommended to stick the vertical floor to the wall on the lower floor.
The upper floor is recommended to be glued to the ground and the wall.
【power supply】
Input voltage: AC100-240V 50/60HZ
Output voltage: DC5V 1000mA
Output interface: DC3.5x1.35x10
Output polarity: The inside jack is positive and the outside is negative.
Outer shell material:Using engineering fire retardant materials
Feature:
Be used for three networks  (mobile / China Unicom / telecommunications, signal amplification artifact)2G&3G cell phone communication signal,4G Network signal.
Strong penetration / wide coverage
It adopts indoor antenna to launch, equipped with a micro-smart chip, and the signal is all-round coverage and easily penetrates 8 walls.
With AGC intelligent gain control function, it automatically controls the gain according to the strength of the input signal to avoid interference to the base station.
Low radiation
Detailed working principle：
The outdoor signal is received through the outdoor antenna, and the main engine amplifies the signal and then transmits it through the indoor antenna to cover every corner of the house.
Note:
Dual Band CDMA PCS 850-1900 MHz ,the
Frequency range is very important ,your phone card must be fit this .
Up 8890～915/1710～1785MHz,
Down 925～960/1805～1880MHz.
This Booster could enhance the calling signal of 2G/3G/4G, and also for 4G network extender.
Installation：
Install the outdoor antenna on the top (Please install the outdoor antenna on wooden sticks, bamboo poles or PVC pipes. Do not touch the metal directly to avoid self-excitation!
Install the indoor omni directional ceiling antenna on the ceiling
Connect the indoor antenna that has been connected to the feeder to the indoor port of main engine.
Connect the outdoor antenna to the outdoor port of the main unit; connect the power supply and then successfully installed.
Package includes:
1 x Repeater
1 x Outdoor Receiver
1 x
Indoor Antenna
1 x Charger US Plug
1 x 12m Cable
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
CDMA 850
CDMA 850MHz Cell Phone Signal  Repeater Booster Amplifier Extender + Yagi Antenna Kit
Note: this CDMA can only improve 2G/3G/4G call signal, not for extending
3G/4G internet signal.
Please make sure your phone
Frequency Range，before make order ，thanks
The follow is your phone card frequency text way ,you can check and text it first ，thanks
If your phone
Frequency Range is
850-1900 MHz ,please choose this link ：
https://www.ebay.com/itm/14315059098
0，thanks
Description:
- The repeater works with two antennas (included in the kit). One is the indoor antenna which communicates with your cell phone or laptop data card, and another one is the outdoor antenna which communicates with the cell tower.
- When the indoor antenna receives the signal from your cell phone or data card, the booster amplifies the signal and transmits it through the cable to outdoor antenna and then to the cell tower. And the better the outside signal, the more coverage the indoor antenna can create.
- The miniature repeater with its unique compact, light weight, easy installation, small interference on the network, the reliability and stability of the unique advan-tages, has been widely, especially suitable for the modern city building area indoor coverage. The miniature repeater is mainly used in office buildings, shop-ping malls, large underground parking field, exhibition center, workshop. Signal using a small power cover-age within building will be more uniform, reduce the cost of inputs.
- Outdoor Yagi antenna receives the downlink signal from the base Station, and the mini wattage repeater amplifies the signal. The indoor retransmission antenna will transmits signal, covering user's home or office. Uplink signals from mobile phones is transmitted to repeater via retransmitting antenna, upon the uplink low noise amplification, the signal is transmitted to the base station through donor end.
Features of all metal design:
Make the radiation close to 0
Simple installation
Make it wider
Performance stability
Radiation barrier technology
Smart chip
Model: CDMA 850MHz
Uplink frequency: 824-849MHZ
Downlink frequency band: 869-894MHz
Parameter：
Input voltage: 110-240V 50/60HZ
Output voltage: DC+12V
Frequency range: 806-960MH/1710-2500MHz
Gain: 3-5dBi
standing-wave ratio: <1.5
Impedance: 50Ω
Polarization mode: vertical
Power capacity: 100W
Ports: N-J, F-J, SMA-J, N-K one to one collocation
Quick Installation Guide:
1.Outdoor antenna connecting outdoor interface(BTS).Outdoor
antenna adopts Yagi or flat antenna,
connection line with professional
(Indoor antenna and outdoor antenna isolation of more than 7 meters)
2. Indoor antenna connected indoor interface(MOBILE). Indoor
antenna adopts ceiling antenna or glue stick antenna, connection
line with professional Indoor antenna away from the window
(balcony)4 meters above
3. Plug in the power, LED lights( Some of the new device has a color
display, Lightning protection, temperature monitoring, into the
protection system)CPU into the work of the state
.
4.Outdoor antenna access repeater, Signal display 1-4 lattice Y,ll
Display 4 best, The normal work. Note: five yellow protective circuit
state,generally not bright. Il
.
5. The above signal display function for reference purposes only, Not
the same environment that is not completely correct. The indoor 4
grid scale full lattice can reach the rated coverage area, Due to
environmental problems, there will be errors. Special statement,This display is for reference only
1 Product Overview
:
1)
With the rapid development of communication network Is
constantly expanding network coverage. The structure housing
more and more complex, resulting in no indoor signal
.
At present the following questions
:
2)Signal blind area, weak area, the conflict zone, busy area
3)For the above problems, according to the market demand
.
Our company carefully developed the mobile phone signal
repeater for signal coverage
.
2 Product Features:
1)Applicable to family, office space, hotels, large buildings
bottom and other indoor places
.
2)Can effectively expand the coverage area, without the I
nterference of base station
3)Effectively reduce mobile phone radiation on the human body.
4)Extend mobile phone battery time and life
5)Convenient installation, mail order and, according to the
specific applications of flexible configuration
.
6)Casting integration, fully enclosed shell, beautiful and durable
7)Using advanced digital filter, High end chip, Stable and efficient
8)Product environmental protection, small volume, low cost.
9)Full duplex, up/ down a high degree of isolation
10)Convenient installation, mail order and, according to the
Specifi
c applications of flexible configuration
3. Technical Indicators
Comparison of three products
:
Installation steps
:
1)Use the mobile phone in outdoor antenna location finding the
strongest signal, Pay attention to lightning protection of outdoor
antenna
2)Select the appropriate location of outdoor
antenna fixed on the wall or the bracket
.
3
)Select the appropriate location of IN
door antenna, (The
equipment is installed in the power socket. Lightning protecti
on.
Waterproof. Placed in a well ventilated place). Install a h
o
s
t
device, Fixed in the wall or the bracket
.
Note:First The phone card is fit the item
Frequency range,then you should f
ollow the instructions to install,the indoor and out door should install right .then Text the item work ,THANKS
Package Included:
- 1 x 850 MHz Repeater
- 1 x Outdoor Yagi Antenna with 10 m Cable
- 1 x Ceiling Antenna with 3 m Cable
- 1 x Charger US Plug
- 1 x User Manual
Payment:
1. We accept Paypal.
2. Please provide the correct shipping address when you  pay the order.
3. If  the address in Paypal is Not the shipping address, please contact us before we dispatch this order.
Shipping:
1.Item ship from US.
2.It will arrive about 1-6 business days.
Contact Us:
1.However at any point in time,if you are not satisfied with your purchase,do not hesitate to contact us via my ebay messages.
2.We are committed to your 100% customer satisfaction in 24 hours.
3.Positive feedback is very important to us.Contact us first Via Ebay Message to report any issue,
please do not leave Negative feedback, we will respond immediately and fix the issue! thank you!!